-40%

Complete Plug & Play Remote Start Kit For 2017-2018 Dodge Ram 1500 2500 3500

$ 93.9

Availability: 311 in stock
  • Brand: fortin evo-all
  • Refund will be given as: Money Back
  • All returns accepted: Returns Accepted
  • Country/Region of Manufacture: Unknown
  • MPN: chrt6
  • Restocking Fee: No
  • Condition: New
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days

    Description

    in titles & description
    Hide gallery view
    View time left
    Add my Store to your Favorites and receive my email newsletters about new items and special promotions!
    General Interest
    Remote start your vehicle off your existing factory remote!
    Pre-programmed and ready to use/install right out of the box! (tool required and is included to complete the key decryptor step yourself).
    This kit is compatible with the following vehicles:
    Dodge Ram (ok for Gas or Diesel engine type) 2013-2017
    4 t tap connections required for installation. (pre-plumbed for you in advance at shipping) 1 is optional for parking lights connection
    REMOTES:
    Uses factory remote
    RANGE:
    Same as factory remotes
    Please note: A person with a good basic knowledge of wiring 12 volt car electronics should be able to install this product successfully - Our remote starts are ONLY compatible with AUTOMATIC transmission vehicles. We also sell manual trans setups, Email for more info regarding those if interested. Wire ties and t-taps are also included to complete your installation.
    Precool in the summer and preheat the vehicle in winter
    Choosing the right remote start system and installing it in your vehicle has become a lot simpler and more affordable with this all-in-one Fortin EVO-Series package. The EVO system includes a digital interface module, which bypasses your vehicle's immobilizer circuits so you can start it without a key, and a T-harness that'll connect the module to your specific vehicle.
    Vehicle-specific harness simplifies the installation
    While not quite plug-and-play, the harness connections cut down installation time considerably, so you do-it-yourselfers out there can save a little money. Fortin includes a code on the package that you use on their website to download and print detailed, illustrated instructions for your installation.
    Use your factory remote
    You start your vehicle by pressing the lock button on your factory key three times. This system lets you start your car from as far away as the key will lock and unlock your doors.
    Optional RF remotes increase the range to 1500 feet
    If you want to be able to start your car from inside your home or office, for instance, you can extend the range of your EVO up to a quarter mile by simply plugging in one of these RF remote kits to the interface module.
    This is a genuine Lessco product prewired and designed specifically for the vehicle listed. All the prep work is done, Leaving you you more time to enjoy your new remote starter!
    Activates from existing Factory Remote. (VEHICLE MUST HAVE OEM KEYLESS ENTRY) Press the lock button on the OEM Remote 3 times to activate remote start function. Free proprietary copyrighted text style wire code sheet available upon request, Just ask. Please note the year make and model and key/starting method type.
    Latest firmware guaranteed, FREE Phone technical support available as well with purchase.
    Upgradable to extended range RF kits and/or drone smartphone module (if applicable).
    Printed as well as electronic delivery of the installation guide will be sent to you after checkout. Easy install typically 2-6 connections depending on your preferences.
    Have more questions about features and functionality?
    Look here: https:://fortin.ca/en/products/evo-combos/
    EVO Features:
    3x on-board LEDs for simplified programming and diagnostics.
    1x preloaded firmware for maximum compatibility.
    4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
    20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems
    Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly
    Communication Ports
    3x CAN-Bus controllers.
    3x General purpose controllers (J1850, Class 2, encrypted key etc.).
    2x On-board Relays (SPDT).
    1x Analog Controller 0-12VDC @ 20mV steps (Passlock, MUX).
    1x TB control port for TB-series modules
    THAR Features:
    EVO-ALL T-Harness for the vehicle
    T-Harness connectivity with EVO-ALL
    to your v
    ehicle
    T-Harness connects directly at the ignition column for plug-and-play installation for remote-starter
    Some wires may still need to splice/cut to complete installtion
    **  T-Harness may not complete installation and some wires may need to be hard wired into vehicle similar to a typical car starter install.
    **  Check manufacturers web site to make sure your vehicle is compatible with this system
    Product Features
    3x on-board LEDs for simplified programming and diagnostics
    1x preloaded firmware for maximum compatibility.
    [1]
    4-wire Fortin 2-way datalink port for data-to-data (RS-232) communication with datalink equipped remote-starters and security-systems.
    [2]
    20-wire general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
    Self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.
    Frequently Asked Questions:
    --** DIY BASIC INSTALLATION KNOWLEDGE REQUIREMENT **--
    The installation of this product will require wiring connections. We provide concise directions with wire colors & locations. It is important to note at a minimum, a person with a basic to intermediate knowledge of wiring car electronics should be able to install this product successfully.
    What about the instructions?
    The remote start and interface module both come with installation manuals.
    What other parts will I need?
    None. The kit comes with all the components you will need. The only things you'll need to provide basic supplies like electrical tape wire ties and basic electrical tools.
    How long?
    A pro installer can do this in a couple of hours. Your results may vary.
    Thanks for shopping at Lessco Electronics!
    Please note:
    We process and ship orders Monday - Friday.
    We ship worldwide (see exceptions) Mostly from our warehouse on the east coast with some exceptions when we use a satellite warehouse.
    Free shipping on most items to continental United States (48 States) only.
    Alaska and Hawaii shipments carry an additional shipping fee (typically 6-10 dollars unless item is heavier than 3 pounds then we will calculate by weight).
    Unfortunately, we are unable to select which shipping company/carrier will deliver your product. This might affect you if you live in a rural community that does not accept deliveries from any specific shipping company. We typically use first class mail on items under 13 ounces and priority on items over than that. Items over 5 pounds more likely will ship via FedEx ground.
    International disclaimer (Buyers are responsible for all Taxes, Duties, Custom or import fees) Please check with USPS prior to buying for more information.
    Returns / Exchanges
    Please see the logo above for quick links to all our policies and general information.
    Our customer support is available Monday to Friday from 9am - 4pm
    Please contact us about this item through the eBay messaging system.
    Track Page Views With
    Auctiva's FREE Counter
    SquareTrade © AP6.0
    Protect Your Product With a Consumer Priority Service Warranty